Questions Call Us M-F / 9-5
US Dollar $
FREE SHIPPING ON ORDERS OVER $199*
Amall Rail Service
Amall LOW 8 foot skate rail
All Amall rails MUST be truck freighted due to their size and weight. Shipping method will be VIA Roadway trucking co. or UPS Freight regardless of shipping method selected which takes anywhere from 3-10 business days once the rail is picked up from our building.
Amall Rail service flat low 8 footer:
The low set rails are perfect for beginners or anyone just looking to have a good old time on a little practice rail. Set at roughly 7" these require little effort to get onto and provide a stable surface to learn all your basic tricks on. The 8 footer is super short so it's good for a single trick and is great if you are short on storage space.
Practice makes perfect and nothing helps you step up your game more than a high quality practice rail made by skaters for skaters. Not only will these help increase your skills, they will offer endless hours of outside exercise and home entertainment for you and your friends. We here at Amall know what works better than anyone else in the pre-made rail game because we have been skating these proven designs everyday our selves for years. You may have seen other pre-made rails for a fraction of the cost but Amall rail service offers rails that are longer, higher, stronger, sturdier and actually are actually 'skateable' unlike some other designs we've seen out there. Our rails are built perfectly flat and straight and will sit flat on an evenly poured concrete slab. For about as much as you would spend on pair of skates you can get yourself an Amall practice rail that will last a lifetime. Our rails are built to order come fully mig welded (no parts & no assembly required) available in galvanized or standard cold rolled steel (also available in any size or tubing type IE square, round, flat upon special request). They are then painted to the color of your choice and delivered to your front door (or a local shipping terminal for pickup for cheaper) VIA Roadway truck freight, and they are even available for pickup at our Sunnyvale, CA HQ. These rails are attached to flat steel bases that keep the rail upright under any circumstance yet are still easily rolled over if you happen to miss a trick. To further help keep the rail in place the bottoms of the bases are coated with a truck bed liner to keep the rail from sliding and to prevent concrete scaring.
To make sure you are going to be happy with the length of your Amall rail walk a tape measure on the ground. While you are at it, measure how high it will be. This will ensure you are getting a rail that you will be happy with. The most common mistake with practice rails is length. It always seems good on paper, but when they are built and on the ground they end up being a lot shorter than you would have imagined.
Amall rail service is only available within the lower 48 states
and must be truck freighted individually from regular orders.
Amall rails are made to order
(please allow 2 weeks for rail to be built before being shipped.) Estimated time for rail delivery is roughly 3 weeks.
Actual shipping costs may differ from quote. Some destinations may be cheaper while others may be more expensive. Actual shipping charges will be charged at release of order
Although we paint the rails with a rust preventive paint if you plan on storing the rail during the winter or it will exposed to abnormally wet conditions it is highly recommended that you select the galvanized option to prevent rust where the paint may be rubbed off. To get a better idea of difference in materials click the technical specs tab.
: in-line skating, skateboarding, biking, snowboarding, skiing, scootering, etc. are all hazardous recreational activities. Use of these rails can easily result in serious injury and possibly death. Any use of product made or sold by Aggressivemall.com is at your own risk as Aggressivemall.com does not assume any responsibility of injuries. Please wear all necessary protective gear when skating.
Galvanized steel has gone through a chemical process to keep it from corroding. The steel gets coated in layers of zinc because rust won't attack this protective metal. For countless outdoor, marine, or industrial applications, galvanized steel is an essential fabrication component.
The principal method of making steel resist corrosion is by alloying it with another metal, zinc. When steel is submerged in melted zinc, the chemical reaction permanently bonds the zinc to the steel through galvanizing. Therefore, the zinc isn't exactly a sealer, like paint, because it doesn't just coat the steel; it actually permanently becomes a part of it.
The zinc goes through a reaction with the iron molecules within the steel to form galvanized steel. The most external layer is all zinc, but successive layers are a mixture of zinc and iron, with an interior of pure steel. These multiple layers are responsible for the amazing property of the metal to withstand corrosion-inducing circumstances, such as saltwater or moisture.
Zinc also protects the steel by acting as a "sacrificial layer." If, for some reason, rust does take hold on the surface of galvanized steel, the zinc will get corroded first. This allows the zinc that is spread over the breach or scratch to prevent rust from reaching the steel.
This makes the Galvanized coating technically softer but the Galvanized steel WILL NOT RUST. Keep in mind minor damage can be caused if using metal parts on galvanized steel such as bike pegs or skateboard trucks. While this damage can never make the rail unskateable small imperfections may occur.
Standard steel rails once the paint has been removed will rust. Under normal use this will not effect skating. A solid steel surface is more resistant to dents and dings (damage can be caused if using metal on metal such as bike pegs or skateboard trucks on galvanized steel.)
Practice rail - construction - 2" ID pipe
2" ID rail (galvanized or steel)
8 feet long
2 supports - 7" tall
Cold rolled steel bases - 3/16" thick (painted to prevent rust).
Entire rail painted color of your choice to increase slide & to prevent rust.
Bases coated w/rubber grip 'truck bed' lining to prevent rails from sliding on slick surfaces and also to prevent concrete scaring
Lead time is roughly 2 weeks regardless of shipping method requested
Amall rails available in round, flat or square tubing and in just about any height or length. CALL OR EMAIL FOR PRICING ON CUSTOM RAILS
Browse for more products in the same category as this item:
Amall Rail Service
Terms & Conditions
SIGN UP FOR OUR EMAIL LIST
For aMALL news & special offers!
Copyright (c) 2011 Agressive Mall. All Rights Reserved
. Designed by
(Your shopping cart is empty)